Loading ...
Loading ...
Loading ...
Figure 10-9 Set Rule
5.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
6.
For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
7.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with the models.
10.3.10 Set Parking Detecon
It detects parking violaon in a predened area. When the parking me exceeds a set threshold,
the device can take linkage acons. It is applicable in expressway and one-way street.
Before You Start
●
Go to VCA and select the applicaon. Select Smart Event and click Next to enable the funcon.
●
For the device supporng HEOP, go to VCA to import and enable Smart Event.
Steps
1.
Go to VCA → Set Applicaon → Smart Event → Parking Detecon .
2.
Check Enable.
3.
Click Add to add a rule and set a detecon area.
1) Draw a detecon area. Click
, click on the live view to specify the vertexes and draw the
boundaries of the detecon area, and right click to complete drawing.
Network Camera User Manual
90
Loading ...
Loading ...
Loading ...