Loading ...
Loading ...
Loading ...
Note
The funcon is only supported by certain models. The actual display varies with the models.
10.3.9 Set Fast Moving Detecon
When there are targets moving at a high speed in a predened area, the device will take linkage
acons and trigger an alarm.
Before You Start
●
Go to VCA and select the applicaon. Select Smart Event and click Next to enable the funcon.
●
For the device supporng HEOP, go to VCA to import and enable Smart Event.
Steps
1.
Go to VCA → Set Applicaon → Smart Event → Fast Moving Detecon .
2.
Check Enable.
3.
Click Add to add a rule and set a detecon area.
1) Draw a detecon area. Click , click on the live view to specify the vertexes and draw the
boundaries of the detecon area, and right click to complete drawing.
2) Set the minimum size and the maximum size for the target to improve detecon accuracy.
Only targets whose size are between the maximum size and the minimum size trigger the
detecon. Click and , then drag the mouse in the live view to draw the minimum and
maximum target size.
3) Oponal: Click to delete all the seng areas.
4.
Set Rules.
Sensivity
Sensivity stands for the percentage of the body part of an acceptable target that enters the
pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands for the target body part that
goes across the pre-dened region. ST stands for the complete target body. The higher the
value of sensivity is, the more easily the alarm can be triggered.
Network Camera User Manual
89
Loading ...
Loading ...
Loading ...