Loading ...
Loading ...
Loading ...
Note
OSD overlay only counts the number of the person on the current day. The data will be
cleared automacally when the device restarts or at the daily reset me.
Daily Reset Time
The device clears the data in 00:00 each day by default. You can select a me point through
the drop-down list. Aer selecng, the counng data will be automacally cleared at this
me point every day.
You can click Manual Reset to manually trigger a data reset and clear the current people
counng data.
9.
Click Save.
10.
Set arming schedule. See Set Arming Schedule .
11.
Set linkage method. See Linkage Method Sengs .
12.
Click Save.
13.
Oponal: Set people counng data uploading parameters.
Click Data Upload to enter the interface. Click Save aer nishing the sengs.
Real-Time Data Uploading
Send the real-me data to the plaorm.
Upload Data Periodically
Set the Data Stascs Cycle, and the passenger ow counng data will be uploaded to the
plaorm at intervals according to the Data Stascs Cycle.
14.
Oponal: Set people counng advanced parameters.
Click Advanced to enter the interface. Click Save aer nishing the sengs.
Version
It stands for the current algorithm version.
Clear Storage Data
Clear all people counng data stored in the device. This funcon must be used with cauon.
Result
●
If the target crosses the detecon area along the entering direcon and crosses the detecon
line, then it is counted as the entering number.
●
If the target crosses the detecon area along the exing direcon and crosses the detecon line,
then it is counted as the exing number.
What to do next
Go to Applicaon Display to view detailed people counng data analysis. For detailed sengs,
refer to
View People Counng Data .
Network Camera User Manual
109
Loading ...
Loading ...
Loading ...