Loading ...
Loading ...
Loading ...
10.4 Face Capture
The device can capture the face that meets the rules in the congured rule area, and the captured
picture will be uploaded.
Note
●
For certain device models, you need to enable this funcon on VCA page rst.
●
The funcon is only supported by certain device models.
10.4.1 Set Face Capture
The face that appears in the congured area can be captured.
Before You Start
●
Go to VCA and select the applicaon. Select Face Capture and click Next to enable the funcon.
●
For the device supporng HEOP, go to VCA to import and enable Face Capture.
Steps
1.
Go to VCA → Set Applicaon → Face Capture → Rule .
2.
Check Enable to enable the rule sengs.
3.
Click to draw the detecon area you want the face capture to take eect. Draw area by le-
clicking end-points in the live view window, and right-clicking to nish the area drawing. It is
recommended that the drawn area occupies 1/2 to 2/3 of the live view image.
4.
Draw pupil distance.
Min. Pupil Distance
Click to draw the minimum pupil distance. If the pupil distance of the face in the video
image is smaller than the minimum pupil distance, the face will not be detected.
Max. Pupil Distance
Click to draw the maximum pupil distance. If the pupil distance of the face in the video
image is larger than the maximum pupil distance, the face will not be detected.
You can also input the value of distance in the text eld.
5.
Oponal: For shield region sengs, refer to Set Shield Region .
6.
For the arming schedule sengs, refer to
Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
7.
Click Save.
8.
For overlay and capture sengs, refer to Overlay and Capture . For advanced parameters
sengs, refer to Face Capture Algorithms Parameters .
Result
You can view and download captured pictures in Playback → Picture . Refer to View and
Download Picture for details.
Network Camera User Manual
92
Loading ...
Loading ...
Loading ...