Loading ...
Loading ...
Loading ...
2) Set the minimum size and the maximum size for the target to improve detecon accuracy.
Only targets whose size are between the maximum size and the minimum size trigger the
detecon. Click and , then drag the mouse in the live view to draw the minimum and
maximum target size.
3) Oponal: Click to delete all the seng areas.
4.
Set rules.
Threshold
Threshold stands for the threshold for the parking me in the region. If the parking me
exceeds the threshold, an alarm is triggered. The larger the value of the threshold is, the
longer the alarm triggering me is.
Sensivity
Sensivity stands for the percentage of the part of an acceptable target that enters the pre-
dened region. Sensivity = 100 - S1/ST × 100. S1 stands for the target part that goes across
the pre-dened region. ST stands for the complete target. The higher the value of sensivity
is, the more easily the alarm can be triggered.
Figure 10-10 Set Rule
5.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
6.
For the arming schedule seîž«ngs, refer to Set Arming Schedule . For the linkage method seîž«ngs,
refer to Linkage Method Seîž«ngs
7.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with the models.
Network Camera User Manual
91
Loading ...
Loading ...
Loading ...