Hikvision IDS-2CD7A46G0/H-IZHSY User Manual

Loading ...

Figure 10-2 Set Rule

Oponal: You can set the parameters of mulple areas by repeang the above steps.

For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,

refer to Linkage Method Sengs .

Click Save.

10.3.3 Set Region Entrance Detecon

It is used to detect objects entering a predened virtual region from the outside place. If it occurs,

the device can take linkage acons.

Before You Start

●

Go to VCA and select the applicaon. Select Smart Event and click Next to enable the funcon.

●

For the device supporng HEOP, go to VCA to import and enable Smart Event.

Steps

Go to VCA → Set Applicaon → Smart Event → Region Entrance Detecon .

Check Enable.

Click Add to add a rule and set a detecon area.

1) Draw a detecon area. Click , click on the live view to specify the vertexes and draw the

boundaries of the detecon area, and right click to complete drawing.

2) Set the minimum size and the maximum size for the target to improve detecon accuracy.

Only targets whose size are between the maximum size and the minimum size trigger the

detecon. Click

and , then drag the mouse in the live view to draw the minimum and

maximum target size.

3) Oponal: Click to delete all the seng areas.

Set parameters.

Detecon Target

This funcon allows alarm triggering by specied selected target types. If the detecon target

is not selected, all the detected targets will be reported.

Network Camera User Manual

Loading ...

Hikvision IDS-2CD7A46G0/H-IZHSY 4MP DeepinView Moto Varifocal Bullet Camera