Loading ...
Loading ...
Loading ...
8.12 WebSocket(s)
WebSocket or WebSockets protocol should be enabled if you use Google Chrome 57 and its above
version or Mozilla Firefox 52 and its above version to visit the device. Otherwise, live view, image
capture, digital zoom, etc. cannot be used.
Go to Conguraon → Network → Network Service → WebSocket(s) to set parameters, and click
Save.
WebSocket
TCP-based full-duplex communicaon protocol port for plug-in free preview via HTTP protocol.
WebSockets
TCP-based full-duplex communicaon protocol port for plug-in free preview via HTTPS protocol.
8.13 Port Mapping
By seng port mapping, you can access devices through the specied port.
Steps
1.
Go to Conguraon → Network → Network Service → NAT .
2.
Select the port mapping mode.
Auto Port Mapping Refer to
Set Auto Port Mapping for detailed informaon.
Manual Port Mapping Refer to
Set Manual Port Mapping for detailed informaon.
3.
Click Save.
8.13.1 Set Auto Port Mapping
Steps
1.
Check Enable UPnPâ„¢, and choose a friendly name for the camera, or you can use the default
name.
2.
Select the port mapping mode to Auto.
3.
Click Save.
Note
UPnP™ funcon on the router should be enabled at the same me.
8.13.2 Set Manual Port Mapping
Steps
1.
Check Enable UPnPâ„¢, and choose a friendly name for the device, or you can use the default
name.
Network Camera User Manual
56
Loading ...
Loading ...
Loading ...