Loading ...
Loading ...
Loading ...
Note
●
For certain device models, you need to enable People Counng on VCA page rst.
●
The funcon is only supported by certain device models.
10.7.1 Set People Counng Rule
Aer seng the detecon rules and algorithm parameters, the device calculates the number of
people entering or exing in the rule area, triggers linkage acons and uploads data automacally.
Before You Start
●
Go to VCA and select the applicaon. Select People Counng and click Next to enable the
funcon.
●
For the device supporng HEOP, go to VCA to import and enable People Counng.
Steps
1.
Go to VCA → Set Applicaon → People Counng → Rule .
2.
Check Enable to enable the funcon.
3.
Click Add to add a detecon area.
4.
Click to draw the polygon detecon area (count area). Le-click end-points in the live view
window, and right-click to nish the drawing.
5.
Click to draw the detecon line. The arrow shows entering direcon, you can click to
change the direcon.
Note
In order to improve the counng accuracy, please draw the detecon area according to the
following rules.
●
The detecon area needs to cover the people entering and exing access.
●
The detecon line must be completely contained within the red detecon area and
perpendicular to the path of the person passing through.
6.
Oponal: Adjust the detecon area and detecon line.
Click
Clear the selected detecon area or line.
Click
Clear all detecon areas and lines.
7.
Oponal: Repeat the above steps to draw up to 3 detecon areas and corresponding detecon
lines.
8.
Set people counng parameters.
OSD Overlay Content
Select the counng data type to be displayed in the live view image from the drop-down list,
and adjust the display posion of people counng data in the live view image.
Network Camera User Manual
108
Loading ...
Loading ...
Loading ...