Hikvision IDS-2CD7A46G0/H-IZHSY User Manual

Loading ...

Before You Start

Before seng the SNMP, you should download the SNMP soware and manage to receive the

device informaon via SNMP port.

Steps

Go to Conguraon → Network → Network Sengs → SNMP .

Check Enable SNMPv1, Enable SNMP v2c or Enable SNMPv3.

Note

The SNMP version you select should be the same as that of the SNMP soware.

And you also need to use the dierent version according to the security level required. SNMP v1

is not secure and SNMP v2 requires password for access. And SNMP v3 provides encrypon and

if you use the third version, HTTPS protocol must be enabled.

Congure the SNMP sengs.

Click Save.

8.5 Set IEEE 802.1X

You can authencate user permission of the connected device by seng IEEE 802.1X.

Go to Conguraon → Network → Network Sengs → 802.1X , and enable the funcon.

Select protocol and version according to router informaon. User name and password of server are

required.

Note

●

If you set the Protocol to EAP-TLS, select the Client Cercate and CA Cercate.

●

If the funcon is abnormal, check if the selected cercate is abnormal in Cercate

Management.

8.6 Set QoS

QoS (Quality of Service) can help improve the network delay and network congeson by seng

the priority of data sending.

Note

QoS needs support from network device such as router and switch.

Steps

Go to Conguraon → Network → Network Sengs → QoS .

Set Video/Audio DSCP, Event/Alarm DSCP and Management DSCP.

Network Camera User Manual

Loading ...

Hikvision IDS-2CD7A46G0/H-IZHSY 4MP DeepinView Moto Varifocal Bullet Camera