Loading ...
Loading ...
Loading ...
The reference brightness of a face in the face exposure mode. If a face is detected, the
camera adjusts the face brightness according to the value you set. The higher the value, the
brighter the face is.
Min. Duraon
The minimum duraon of the camera exposures the face.
Note
If the face exposure is enabled, please make sure the WDR funcon is disabled, and the
manual iris is selected.
Face Filtering Time
It means the me interval between the camera detecng a face and taking a capture. If the
detected face stays in the scene for a me shorter than the set ltering me, capture will not
be triggered. For example, if the face ltering me is set as 5 seconds, the camera will
capture the detected face when the face keeps staying in the scene for 5 seconds.
Note
The face ltering me (longer than 0 s) may increase the possibility of the actual capture
mes less than the set value above.
Facial Posture Filter
Facial posture lter can lter out face of certain postures. The gure on the right of the slider
stands for the posture angle which is acceptable in the face capture acon. Click to display
the diagram illustrang the face turning direcon when seng up this lter.
Upload Feature
Feature stands for the feature informaon the algorithm can tell from face pictures. Check the
funcon to upload the informaon.
Restore Parameters
Restore Defaults
Click Restore to restore all the sengs in advanced conguraon to the factory default.
10.4.4 Set Shield Region
The shield region allows you to set the specic region in which the set smart funcon rule is
invalid.
Steps
1.
Select Shield Region.
2.
Click
to draw shield region. Repeat this step above to set more shield regions.
3.
Oponal: Select and click on the drawn region, then click to delete the selected drawn
region.
Network Camera User Manual
95
Loading ...
Loading ...
Loading ...