Loading ...
Loading ...
Loading ...
DJI FlyCart 30
User Manual
©
2024 DJI All Rights Reserved.
87
Flight Route Name It is recommended to name the ight route using the location name.
Safe Takeo Altitude Safe Takeo Altitude is altitude relative to takeo point altitude.
When the Safe Takeoff Altitude is higher than the flight route
altitude, the aircraft will ascend to the Safe Takeo Altitude and y to
the takeo point, then descend to the start point of the ight route.
When the Safe Takeo Altitude is lower than the ight route altitude,
the aircraft will ascend to the Safe Takeo Altitude and then ascend
to the ight route altitude, and y to the start point.
Direct Routing When enabled, the aircraft will ascend to the Safe Takeo Altitude
and y straight to the start point.
Attitude Mode It is recommended to select ALT.
Speed The horizontal ight speed during the ight route.
Upon Completion Set to Hover or Land.
On Signal Lost Set to Continue Task, Return to Home, Land, Hover.
Waypoint Type Set the action taken when the aircraft flies past the waypoint. It is
recommended to use Turns before Waypoint. Flies through.
3. Click the left button of the mouse to add a waypoint, click the right button to add or
delete a waypoint. The map shows the flight route distance, estimated duration and the
waypoint information. Tap the waypoint to move, tap < or > to edit the next waypoint. It is
recommended to select Follow Route.
4. Edit ight route via map.
a. Compass shows the map direction.
b. Tap to switch to 2D or 3D view.
c. Display the ight area and Restricted Areas.
d. Select show elements.
e. Zoom in or out of the map.
f. Check the flight altitude in elevation layer view. If the waypoint is too low, adjust the
altitude on the map. Drag the mouse up or down while pressing the ALT key to adjust
the altitude. Press the left button of the mouse while pressing the CTRL key to adjust the
view.
5. Tap Save to complete ight route plan. Start point and end point can be linked later.
Loading ...
Loading ...
Loading ...