Loading ...
Loading ...
Loading ...
DJI FlyCart 30
User Manual
©
2024 DJI All Rights Reserved.
71
Single and Dual Battery Mode
The FlyCart 30 aircraft supports single and dual battery mode. Dual battery mode is used by
default. Single battery mode needs to be enabled in DJI Pilot 2 before use.
1. It is recommended to use the front battery compartment for single battery ight. Mount the
provided battery cover onto the battery compartment not in use to protect the battery port.
The aircraft cannot be powered on without mounting the battery cover.
2. Enable single battery mode in DJI Pilot 2: Tap
> > Single Battery Flight.
• In dual battery mode, if the battery LEDs did not light up after powering on, unplug and
plug the battery to ensure it is mounted rmly. Take o only after all the battery LEDs
are lit up normally. Otherwise, the operation time will be reduced signicantly. If the
LEDs are still o, replace the battery with another battery.
• Only use single battery mode in special situations. The max payload can be increased
but the operation time will be reduced in single battery mode.
Self-Heating
The battery has a built-in self-heating feature to be used when operating in low-temperature
conditions:
1. When the battery temperature is lower than 10° C (50° F), self-heating starts once the battery
is inserted into the aircraft and powered on. It is recommended to operate the battery after
self-heating turns o. Self-heating will turn o automatically after takeo.
2. If the battery is not in the aircraft, press and hold the battery level button for ve seconds to
initiate self-heating. The battery will continue to keep warm with a temperature between 10°
to 12° C (50° to 53.6° F) for approximately 30 minutes. Press and hold the power button for
ve seconds to stop self-heating.
3. When the battery temperature is lower than 20° C (68° F), connect the battery to the battery
station and power it on. The battery will be heated and powered by the battery station.
Loading ...
Loading ...
Loading ...