CART 30 User Manual

Loading ...

DJI FlyCart 30

User Manual

• Only use the C8000 Intelligent Battery Station produced by Shenzhen Gold Power Tech

Co., Ltd. to charge DB2000 Intelligent Flight Batteries. DJI does not take any responsibility

for damage caused by using non-DJI-specied charging devices.

Using Paired Batteries

Label the two batteries with paired battery stickers before use. Charge and discharge the two

batteries together to optimize ight performance and maximize battery life. After the batteries

are inserted and the aircraft is powered on, if there is a significant difference in the battery

life of the two batteries, the app will display a prompt alerting the user to the condition of the

batteries. It is recommended to replace them with batteries with similar performance levels

before use.

Powering On/O

• A battery cannot be powered on before inserting it into the aircraft.

Install the batteries in the aircraft before powering on or off. Press the power button, then

press again and hold for two seconds to power on the battery. Once a battery is powered on,

the other battery will power on after that. Press the power button, then press again and hold

to power o the batteries after ight. After the motor stops, disconnect the batteries from the

aircraft.

Battery Hot Swapping

After landing, the aircraft does not have to be powered o when swapping its batteries. Insert

a fully charged battery and wait for three seconds before inserting the other battery. Battery

Hot Swapping needs to be enabled in DJI Pilot 2 and is only supported when using dual battery

mode. Tap

> > Battery Hot Swapping to enable.

• DO NOT use the battery hot swapping method on a rainy day.

• The battery will power off automatically if performing battery hot swapping without

having rst enabled it in DJI Pilot 2.

Using the Battery

Charging

Use the C8000 Intelligent Battery Station to charge the DB2000 Intelligent Flight Battery.

Loading ...

Dji CART 30