Dji CART 30

User Manual - Page 63

For CART 30.

PDF File Manual, 96 pages, Download pdf file

Loading ...
Loading ...
Loading ...
DJI FlyCart 30
User Manual
©
2024 DJI All Rights Reserved.
63
Landing Protection Function
Landing Protection activates during auto landing. The procedure is as follows:
1. After arriving at the home point, the aircraft descends to a position 3 m above the ground
and hovers.
2. Control the pitch and roll sticks to adjust the aircraft position and make sure the area is
suitable for landing.
3. Pull down the throttle stick or follow the onscreen instructions in the app to land the aircraft.
The aircraft will land automatically if there is no command from the remote controller within
20 seconds.
Alternate Landing
In the case of low battery or other abnormal situations, an alternate landing site can be set if
the aircraft landing place is far away from the Home Point or the aircraft does not need to y
back to Home Point. The aircraft will y to the alternate landing site after Alternate Landing is
triggered. Alternate Landing can only be triggered automatically by the aircraft.
Setting the Alternate Landing Site
Pin a point in the map on DJI Pilot 2 to set an alternate landing site. Up to ve alternate landing
sites can be set, including any three points, as well as the takeo point and the end of the ight
route (if ight route is enabled).
Smart Low Battery Alternate Landing
If the battery level is not sucient to complete a ight route, a prompt will appear in the app
and a 10-second countdown will commence. The user can select an alternate landing site in the
prompt or press cancel. The aircraft will y to the selected alternate landing site along the ight
route after the user has conrmed the choice. The aircraft will not y to an alternate landing
site if the user cancels the option, but will keep warning the user.
Failsafe Alternate Landing
If the failsafe action is set to Alternate Landing in DJI Pilot 2, the aircraft will y to an alternate
landing site when the remote controller signal is lost during ight.
Overheated Alternate Landing
If the failsafe action is set to Alternate Landing in the Preight Check page of DJI Pilot 2, the
aircraft will y to alternate landing site when the aircraft overheats (such as IMU overheats).
Loading ...
Loading ...
Loading ...