Loading ...
Loading ...
Loading ...
DJI FlyCart 30
User Manual
©
2024 DJI All Rights Reserved.
67
Loss of Navigation Systems
When using xed RTK positioning, the aircraft will switch to GNSS if RTK is unavailable during
ight. If GNSS is also unavailable, the aircraft will switch to Attitude (ATTI) mode automatically to
stabilize its attitude and a prompt will appear in the app to remind users to y with caution and
land as soon as possible.
Control Station Failures
Control station failures include the following scenarios.
1. Control signal is lost: the aircraft will enter Failsafe RTH if Failsafe RTH is enabled in the app.
Refer to Loss of C2 Link for more information about Failsafe RTH. The aircraft action can also
be set to hovering in place until the aircraft lands with critically low battery level or landing
directly.
2. The app crashes during automatic operations while the control signal is normal: in this
case, the C2 link between the aircraft and the remote controller is in good condition, so the
aircraft will continue performing the current operation until landing is triggered by critically
low battery level. Users can exit from Route operations by moving the control stick slightly
and control the aircraft manually.
Flyaway
The flight telemetry of the aircraft will be displayed on the screen of the remote controller
during flight. If the aircraft flies away during operation, users can search for the aircraft
according to the location of the aircraft and remote controller displayed on the map in the
app. If the GNSS signal of the aircraft is lost after the aircraft ies away then the aircraft will not
be displayed on the map in the app. Users can estimate the location of the aircraft to its last
location, ight speed, and heading before the loss of the GNSS signal.
Reporting Requirements
Users are responsible to inform DJI of any event of an uncontrolled crash or yaway within 2
business days through DJI Support, a DJI authorized dealer, or other means and shall upload the
ight data related to the event.
Loading ...
Loading ...
Loading ...