Loading ...
Loading ...
Loading ...
DJI FlyCart 30
User Manual
66
©
2024 DJI All Rights Reserved.
Emergency Procedures
Engine Failure
If one or more motors fail during flight, the aircraft will calculate the remaining propulsion
according to factors such as the status of the propulsion system, aircraft weight, and flight
environment. Two possible scenarios may occur:
1. Remaining propulsion is sucient: The aircraft will continue to y in a stable condition with
remaining propulsion.
2. Remaining propulsion is insucient: The aircraft will spin and perform a controlled descent.
Afterward, it is recommended that users land the aircraft manually and check and repair the
aircraft immediately.
Fire
A prompt will appear in the app and the ight controller will reduce the power of the aircraft
when the ight battery temperature is too high. The battery will be locked for future use if it
exceeds the temperature threshold during ight and cannot be used again after landing.
Follow the instructions below if the ight battery catches re.
1. If the battery catches fire when the battery is being charged using a battery station,
make sure personal safety is guaranteed, power off the battery station immediately, and
disconnect the battery from the charging device. If the battery catches re when the battery
is in the aircraft, make sure personal safety is guaranteed and disconnect the battery from
the aircraft immediately.
2. Transfer the ammable materials surrounding the battery to a safe distance of more than 5 m
away.
3. If the re is small, use materials such as large amount of sand to cover the location of the re
and pour cold water to cool the battery until there is no longer any smoke being produced.
With the help of re-resistant gloves or other protective tools that allow users to avoid direct
contact with the battery, move the battery to a container with enough water to fully immerse
the battery and add an appropriate amount of salt to help fully discharge the battery. Leave
the container in a cool place for more than 72 hours and take out the battery and discard it.
4. If the re is large, double check that there are no ammable materials surrounding the re,
extend the safety distance to more than 10 m, and evacuate any people in the surrounding
environment. Wait until the battery burns out and the re is extinguished in order to avoid
any further accidents.
Loss of C2 Link
Failsafe RTH and Failsafe Alternate Landing will be triggered after the C2 link is lost. Refer to the
Return to Home and Alternate Landing section for details.
Loading ...
Loading ...
Loading ...