Loading ...
Loading ...
Loading ...
DJI FlyCart 30
User Manual
78
©
2024 DJI All Rights Reserved.
Delivery
The cargo system is suitable for delivering small volumes of cargo. Manual ight or a ight route
can be selected when delivering the cargo. The cargo delivery process is as follows.
• FlyCart 30 supports a winch system (sold separately). Refer to the DJI FlyCart 30 Winch
System user guide for more information.
Operation Requirements
1. DO NOT y the aircraft above people. Keep more than 10 m distance between the aircraft
and people. Stay away from the rotating propellers.
2. DO NOT y in cities and towns.
3. Select open, at areas for takeo and landing points. Check and make sure the area is free
of any objects. DO NOT take o or land on the road with people.
4. Check if the frame arm locks are securely in the lock position after unfolding the aircraft.
Check if the propellers are tightened properly on the motors and in good condition. Make
sure the battery port has no black oxidization marks or rust.
5. If the weight value is over 0 when there is no cargo on board, weight calibration is needed.
The cargo should be placed in the middle of the cargo case and xed securely. Make sure the
cargo does not exceed the payload capacity by checking if there are any DJI Pilot 2 warnings.
Also, make sure there is no center of gravity warning. When the red icon appears, the cargo
position should be adjusted. When there is cargo with a shifting center of gravity, the cargo
should be moved toward the front of the case.
6. Make sure the cargo case lock is in the appropriate position when opening or closing the
cargo case. Pull out to open or lock.
7. Operators must wear a helmet.
Cargo Case Weight Calibration
If the weight value is over 0 when there is no cargo on board, calibration is needed.
Calibration Process
1. Place the aircraft on at ground and make sure the cargo case is empty.
2. Tap
> > Weight Sensor Calibration in the camera view of DJI Pilot 2.
• Add cargo into the cargo case after calibration is successful.
• It is recommended to calibrate the weight sensor every month to ensure sensor
accuracy.
Loading ...
Loading ...
Loading ...