Loading ...
Loading ...
Loading ...
DJI FlyCart 30
User Manual
40
©
2024 DJI All Rights Reserved.
Using with the DJI D-RTK 2 Mobile Station
1. Refer to the D-RTK 2 Mobile Station User Guide for more information about linking the
aircraft and the mobile station and setting up the mobile station.
2. Power on the mobile station and wait for the system to start searching for satellites. The
RTK status icon on top of the Camera View in the app will become white to indicate that the
aircraft has obtained and is using the dierential data from the mobile station.
Using with the Network RTK Service
The Network RTK service uses the remote controller instead of the base station to connect to an
approved Network RTK server for dierential data. Keep the remote controller powered on and
connected to the internet when using this function.
1. Make sure the remote controller is connected to the internet.
2. In the app, go to Camera View, tap
> to select RTK Signal Type to Network RTK.
3. Tap Check Plan Coverage to make sure Network RTK signal coverage is available in the
area where the aircraft will be used. Tap RTK Service Center and follow the instructions to
purchase and activate the service.
4. Wait for the remote controller to be connected to the Network RTK server. The RTK status
icon at the top of the Camera View in the app will turn white, indicating that the aircraft has
obtained and used the RTK data from the server.
Loading ...
Loading ...
Loading ...