CART 30 User Manual

Loading ...

DJI FlyCart 30

User Manual

Alternate Landing Procedure

Alternate Landing Procedure during Manual Flight

a. If more than 5 m (16.4 ft) from the Home Point and below the pre-set RTH altitude, the

aircraft will ascend to the pre-set RTH altitude before ying to the alternate landing site. The

aircraft will y directly to the alternate landing site if it is above the pre-set RTH altitude.

b. If the aircraft is less than 5 m (16.4 ft) from the alternate landing site, it will y directly to the

alternate landing site at the current altitude.

If more than one alternate landing site is set, an alternate landing site can be selected in the 10

seconds after the Low Battery Alternate Landing prompt appears in the app. The aircraft will

select an alternate landing site automatically if another type of alternate landing is triggered.

Alternate Landing Procedure during Flight Route

a. If the aircraft is less than 50 m (164 ft) from the nearest point of the ight route, it will y

to that nearest point and then fly along the flight route to the projected point above the

alternate landing site. If the projected point is higher than the RTH altitude, the aircraft will

fly to the projected point at current altitude. If the projected point is lower than the RTH

altitude, the aircraft will ascend to the RTH altitude and y to the projected point and land.

b. If the aircraft is further than 50 m (164 ft) from the nearest point of the flight route, the

alternate landing procedure is the same as the alternate landing procedure during manual

ight.

• Projected Point: The projected point is the nearest point along the ight route above the

alternate landing site.

• After the alternate landing is triggered, alternate landing site and alternate landing route

cannot be changed.

Exit from Alternate Landing

a. Press the ight pause button on the remote controller to exit from alternate landing.

b. Alternate landing will be exited automatically when there is obstacle sensed or if a special

situation occurs, such as approaching restricted zones, reaching maximum altitude or

reaching maximum ight distance.

c. RTK positioning is used by default during alternate landing. GNSS positioning will be used if

RTK positioning is unavailable. Alternate landing will be exited automatically if GNSS is also

unavailable.

d. Alternate landing will be exited automatically if there is an abnormal situation such as the

battery level is critically low or the motors have overheated.

• Alternate landing is not available when the GNSS signal is weak or unavailable.

• Alternate landing route will be displayed in the app during alternate landing.

Loading ...

Dji CART 30