Hikvision DS-7604NI-M1/4P User Manual

Loading ...

4.3.4 Congure Port Mapping (NAT)

Two ways are provided for port mapping to realize the remote access via the cross-segment

network, UPnP™ (Universal Plug and Play), and manual mapping. UPnP™ can permit the device

seamlessly discover the presence of other network devices on the network and establish funconal

network services for data sharing, communicaons, etc. You can use the UPnP™ funcon to enable

the fast connecon of the device to the WAN via a router without port mapping.

Before You Start

If you want to enable the UPnP™ funcon of the device, you must enable the UPnP™ funcon of

the router to which your device is connected. When the network working mode of the device is set

as mul-address, the Default Route of the device should be in the same network segment as that

of the LAN IP address of the router.

Steps

1. Go to System → System Sengs → Network → Network Service → NAT .

Figure 4-13 Port Mapping (NAT)

2. Turn on Enable.

3. Set Mapping Mode.

Auto

The port mapping items are read-only, and the external ports are set by the router

automacally.

Manual

You can manually edit the external port.

4. If Mapping Mode is selected as Manual, click

to edit corresponding ports.

Note

●

The value of the RTSP port number should be 554 or between 1024 and 65535, while the

value of the other ports should be between 1 and 65535 and the value must be dierent from

Network Video Recorder User Manual

Loading ...

Hikvision DS-7604NI-M1/4P 4-ch 1U 4K NVR