Hikvision DS-7604NI-M1/4P User Manual

Loading ...

Figure 4-7 ISUP

2. Turn on Enable.

Note

If ISUP is enabled, the Hik-Connect access will automacally be disabled.

3. Set the related parameters.

Server Address

The plaorm server IP address.

Access Server Port

The plaorm server port, ranges from 1024 to 65535. The actual port shall be provided by

the plaorm.

Device ID

Device ID shall be provided by the plaorm.

Protocol Version

ISUP protocol version, only ISUP 5.0 is available.

Encrypon Key

Encrypon password is required when using ISUP V5.0 version, it provides more secure

communicaon between the device and plaorm. Enter it for vericaon aer the device is

registered to the ISUP plaorm. It cannot be empty, or "ABCDEF".

4. Click Save.

You can see the registraon status (online or oine) aer the device is restarted.

4.2.4 Congure SDK Service

SDK (Soware Development Kit) service is used for third-party partners to integrate dierent

funcons. The enhanced SDK service adopts TLS protocol over the SDK service that provides safer

data transmission.

Steps

1. Go to System → System Sengs → Network → Plaorm Access → SDK.

Network Video Recorder User Manual

Loading ...

Hikvision DS-7604NI-M1/4P 4-ch 1U 4K NVR