Loading ...
Loading ...
Loading ...
AXIS Perimeter Defender
About AXIS Perimeter Defender
Folder settings -
Device conguration path: Select where to store temporary les and calibration video.
Site conguration path: Select where to store conguration les from load paths.
Camera passwords - Look at used passwords and add new password. Passwords are not stored once the user exits the application.
Manage demo clips packages - Import or remove demo clips.
Enable full frame rate mode - Change the frame rate in the live view. See CPU load on page 11 .
Display feet and inches - Change between metric and imperial units.
Change language - Change the language in the application.
About - See the version number of AXIS Perimeter Defender Setup.
Live view
Each connected device gets a live view in the main interface. The live view provides the device status and quick access to the
main functions.
1
2
3
4
5 6 7
8
9 10 11
1. Device name - Click to edit the device name. It always includes the IP address and MAC number of the device. Hover the
name to show the aspect ratio used for analysis, which provides maximum eld of view coverage, and to see if the device is on a
remote connection.
2. Live image - In the overview mode, the frame rate is 1 fps. Double-click to maximize the image and increase the frame rate to 8 fps.
3. Alarm status - The alarm status is only visible if the overlay is active and AXIS Perimeter Defender is installed, congured,
and running.
• Grey means that the alarm functionality is not active or that the conguration settings are loading.
• Green means that the alarm functionality is active.
• Red means that an alarm has been triggered.
4. Detection zones - The detection zones are only visible if the overlay is active and AXIS Perimeter Defender is installed, congured,
and running.
7
Loading ...
Loading ...
Loading ...