Loading ...
Loading ...
Loading ...
AXIS Perimeter Defender
About AXIS Perimeter Defender
- Calibration and scenarios
- Calibration video
• Save — Create a backup of the selected device(s)’ conguration.
• Clear — Erase calibration and scenarios from the selected device(s). This is useful if the cameras have moved, as calibration
and detection zones are then no longer valid.
• View application log — View the AXIS Perimeter Defender internal log.
• Export support log — Generate a support le that contains detailed information. Always include this le with a support
request.
CPU load
The CPU load indicator indicates current computer CPU load in real-time. Too high CPU load could result in an unresponsive computer
or application. Make sure to close other applications when you use AXIS Perimeter Defender Setup to maximize your CPU allocation.
If the CPU load is too high and you try to add a device, the system issues a warning.
Added devices take up CPU resources from the host computer to decode video streams from the camera and display them. To limit the
impact on the host computer, video streams from added devices display at a reduced frame rate (approximately 1 fps) by default.
Normal frame rate (approximately 8 fps) is restored when streams are maximized or during the calibration process.
Important
Enable full frame rate mode can lead to an unresponsive interface if you connect to a large number of cameras or when you
use a low power computer.
Show a demo of AXIS Perimeter Defender
For demo purposes, AXIS Perimeter Defender and AXIS Perimeter Defender PTZ Autotracking comes pre-installed with a few demo
clips that can be used to demonstrate the analytics without the need for an active, installed camera. The demo clips show the kind of
detection and autotracking results that can be expected in different environments.
1. Go to Application > Add > Demo Clips and do one or more of the following:
- Filter demo clips according to their type.
- Select at least one demo clip.
2. To add the demo clips, click Add Selected Demo Clips.
Once added, the demo clips appear as standard video streams in the interface. Calibration is available and analytics already activated
so that the user immediately sees analytics and autotracking results on the video stream. Analytics and autotracking can be stopped
or started by clicking the running status in the live view or the Run or Stop buttons on the left pane.
Calibration and pairing can be modied and redone. Similarly, detection scenarios can be added, removed and modied.
The Support tab on the left pane has a Clear button that lets you revert calibration and scenarios to the original values. It is not
possible to completely remove the calibration.
11
Loading ...
Loading ...
Loading ...