Rigol DHO812 DHO800 series user manual

Loading ...

Press to access the Analyse menu. In this menu, you can access analysis

features including digital voltmeter (DVM), counter, power analysis, waveform

recording, and pass/fail.

4. Measure Key

Press

to access the Measure menu. You can select the waveform parameters

in the menu. For details, refer to

Select the Measurement Item

5. Cursor Key

Press

to enable cursor measurements. The results are displayed in the right-

side "Result" bar. Three cursor modes are available: Manual, Track, and XY; wherein,

the XY mode is available only when the XY function is enabled.

6. Common Tools Keys

- is the auto scale key. Press this key to enable the auto scale function.

The oscilloscope is automatically configured to best display the input signals by

adjusting the vertical scale, horizontal timebase, and trigger mode. To set up

the key, please refer to

Auto Config

is the RUN/STOP key. Press the key to set the oscilloscope's run state to

"RUN" or "STOP". In "RUN" state, this key is illuminated in green; in "STOP"

state, this key is illuminated in red.

is the key for a single acquisition. Press this key to set the oscilloscope's

trigger mode to "Single".

is the default setup key. Press this key twice to directly restore the

oscilloscope's default settings. You can also press the key and a dialog box is

displayed. Click or tap

OK in the dialog to restore the oscilloscope's default

settings.

is the clear key. Press this key to clear all waveform on the display. If

the oscilloscope is in "RUN" mode, it continues to display new waveforms.

7. Touch Lock Key

Quick Start

Loading ...

Rigol DHO812 oscilloscope