Loading ...
Loading ...
Loading ...
24.3 Appendix C: Factory Settings
Press the front-panel or click/tap Default on the Toolbar and a prompt
message "Restore default settings?" is displayed. Click or tap
OK to restore the
instrument to its factory default settings, as shown in the table below.
Table 24.2 Factory Settings
Parameter Factory Settings
Horizontal
Horizontal Time Base 2 μs
Horizontal Position 0 s
Delayed Sweep OFF
Roll Auto
Fine OFF
Horizontal Expansion Center
Acquisition
Acquisition Mode Normal
Memory Depth 10 kpts
Vertical
CH1 On/Off ON
CH2 On/Off OFF
CH3 On/Off OFF
CH4 On/Off OFF
Impedance 1 MΩ
Fine OFF
Vertical Scale 50 mV
Vertical Offset 0 V
Channel Unit [V]
Channel Coupling DC
Bias 0 V
BW Limit OFF
Channel Delay 0 s
Display Label OFF
Invert OFF
Attenuation 1X
Trigger
Trigger Type Edge Trigger
Trigger Mode Auto
Appendix
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DHO800 User Guide
229
Loading ...
Loading ...
Loading ...