Loading ...
Loading ...
Loading ...
- 7
Set programme switch to step 2. Roller
brush is lowered. The roller brush and
the side brush will rotate.
Note: The bulk waste flap must be raised
briefly to sweep up larger items (up to 60
mm high), e.g. soft drink cans.
Raising bulk waste flap:
Press the pedal for the bulk waste flap
forwards and keep pressed down.
To lower it, take foot off pedal.
Note: An optimum cleaning result can only
be achieved if the bulk waste flap has been
lowered completely.
Set programme switch to step 3. Side
brushes and roller brush are lowered.
Note: Roller brush and side brush start op-
erating automatically.
Note: During operation, the waste contain-
er should be emptied at regular intervals.
Note: During operation, the dust filter
should be shaken off and cleaned at regu-
lar intervals.
Close wet/dry flap
Open wet/dry flap.
Note: You can thus prevent the filter sys-
tem from getting blocked.
Open wet/dry flap.
Note: This protects the filter from moisture.
– Switch on manual filter shake off.
Press Filter shake off button. The filter
will be cleaned for 15 seconds.
Note: Wait until the filter shaking process is
finished and the dust has settled before you
open or empty the waste container.
Raise the waste container slightly and
pull it out.
Empty waste container.
Push in the waste container and lock it.
Empty opposite waste container.
Set programme switch to step 1 (driv-
ing). The side brush and roller brush are
raised.
Turn ignition key to "0" and remove it.
Note: Once the machine has been
switched off, the dust filter is shaken auto-
matically for approx. 15 seconds. Do not
open the machine hood during this period.
Note: The machine has been fitted with an
automatic parking brake that is activated as
soon as the engine is switched off and the
driver leaves his seat.
KM 100/100 R G only
Close fuel cock.
KM 100/100 R LPG only
1 Gas withdrawal valve
Close gas drawing valve by turning it in
clock-wise direction.
DANGER
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Turn ignition key to "0" and remove it.
Secure the wheels of the machine with
wheel chocks.
Secure the machine with tensioning
straps or cables.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Note: Observe markings for fixing points
on base frame (chain symbols). When
loading or unloading the machine, it may
only be operated on gradients of max. 18%.
KM 100/100 R G only
Close fuel cock.
Empty fuel tank.
KM 100/100 R LPG only
Close gas drawing valve by turning it in
clock-wise direction.
Remove the gas bottle and dispose of
according to the applicable rules and
regulations.
DANGER
Risk of injury and damage! Note the weight
of the appliance in case of storage.
If the sweeper is going to be out of service
for a longer time period, observe the follow-
ing points:
Park the sweeper on an even surface.
Set programme switch to step 1 (driv-
ing). The roller brush and side brushes
are raised to prevent the bristles being
damaged.
Turn ignition key to "0" and remove it.
Lock the sweeper to ensure that it does
not roll off.
Clean the inside and outside of the
sweeper.
Park the machine in a safe and dry
place.
KM 100/100 R G only
Fill fuel tank and close fuel cock.
KM 100/100 R LPG only
Close gas drawing valve by turning it in
clock-wise direction.
Remove the gas bottle and dispose of
according to the applicable rules and
regulations.
All motor models:
Change the engine oil
Unscrew spark plugs and pour approx.
3 cm³ of oil into the spark plug hole.
Crank the engine several times before
replacing the spark plug. Screw in the
spark plug.
Disconnect battery.
Charge battery approx. every 2 months.
First switch off the appliance, remove
the key and remove the battery plug or
disconnect the battery before perform-
ing any cleaning or maintenance tasks
on the appliance, replacing parts or
switching over to another function.
Pull out the battery plug or clamp the
battery while working on the electrical
unit.
– Maintenance work may only be carried
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety regula-
tions.
– Mobile appliances used for commercial
purposes are subject to safety inspec-
tions according to VDE 0701.
Sweeping with sweep roller
Sweeping with bulk waste flap raised
Sweeping with side brushes
Sweeping dry floors
Sweep in fibrous and dry waste (such as
dry grass, hay)
Sweeping damp or wet floors
Filter dedusting
Emptying waste container
Turn off the appliance
Transport
1
Storage
Shutdown
Care and maintenance
General notes
23EN
Loading ...
Loading ...
Loading ...