Loading ...
Loading ...
Loading ...
11
Safety Instructions
The oven lamp must be replaced by a service
technician trained by the manufacturer. Do not attempt
to remove the outer casing from the oven.
Before using the oven, place the drip tray in position.
Refer to page 20 for correct installation.
The purpose of the drip tray is to collect excess water
during Steam and Steam Combination mode. It should
be emptied after each Steam and Steam Combination
operation.
Do not use the water tank if it is cracked or broken,
as leaking water could result in electrical failure and
danger of electric shock. If the water tank becomes
damaged, please contact your dealer.
Caution! In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not
be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
The appliance must not be installed behind a decorative
door in order to avoid overheating.
The oven should be cleaned regularly and any food
deposits removed.
Loading ...
Loading ...
Loading ...