Loading ...
Loading ...
Loading ...
Sequence Mode
Sequence Mode provides faster data collection, but does not display waveforms
during sampling process. It improves the waveform capture rate, delivering up-to
400,000 wfs/s. So it can capture the small probability events effectively.
The oscilloscope runs and fills a memory segment for each trigger event and
continues to trigger until memory is filled. After the memory buffer has been filled,
it then displays the waveforms on the screen.
To use the sequence mode, the Horizontal Format must be set to YT.
Do the following steps to use the sequence mode.
1. Press the Acquire button on the front panel to enter the ACQUIRE function
menu;
2. Press the Sequence softkey to enter the SEQUENCE function menu.
Figure 20 SEQUENCE Function Menu
3. Press the Max Segments softkey; and then turn the Universal Knob to select the
desired value.
Do the following steps to replay the sequence waveform under history mode:
1. Press the History softkey to enable HISTORY function.
Loading ...
Loading ...
Loading ...