Loading ...
Loading ...
Loading ...
- 3
1 To the processed water tank/ high-
pressure cleaner
2 to drainage system *)
3 Control shaft *)
4 Immersion pump *)
5 Pump basin of the recycling system *)
6 Separation system (EN 858) *)
7 Sludge collection of the recycling sys-
tem *)
8 Circulation (to sludge collector)
9 Backwash pipe
10 Throttle valve
11 Safety valve
12 Manometer at the filter inlet
13 Multi-channel valve
14 Filament filter
15 Manometer active carbon filter
16 Active carbon filter
17 Test tap **)
18 2. Active carbon filter **)
19 Solenoid valve
20 Restrictor
21 Filtrate hose
22 Overflow valve
*) on building side
**) Option
The following section describes the flow-
path of the water in different positions of the
multi-channel valve.
In filter operations, the water flows via
– Immersion pump
– Multi-channel valve in "FILTRATION"
position
– Filter (flow direction of filtering)
– To the high-pressure cleaner/pro-
cessed water tank
During backwash, the water flows via
– Immersion pump
– Multi-channel valve in position RÜCK-
SPÜLEN/BACKWASH"
– Filter (against flow direction of filtering)
– To the sludge collector
During final rinse the water flows via:
– Immersion pump
– Multi-channel valve in position ERST-
FILTRAT/RINSE
– Filter (flow direction of filtering)
– To the sludge collector
This position is not required for operating
the system.
If the water level in the pump basin exceeds
a certain height, the solenoid valve opens
and water is routed to the sewer system via
the active carbon filter.
– Suitable for dirt water
– Suitable for continuous operations
– With protection against dry-run
NOTICE
Pumps with excessive performance can be
throttled via the throttle valve.
몇 CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
In der Anlage enthaltenes Restwasser
muss vor dem Transport entfernt werden.
When transporting in vehicles, secure the
appliance according to the guidelines from
slipping and tipping over.
몇 CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
In der Anlage enthaltenes Restwasser
muss vor der Lagerung entfernt werden.
Store the appliance in a frost free area.
Function
Flow pattern
Functional description
FILTRATION
RÜCKSPÜLEN/BACKWASH
ERSTFILTRAT/RINSE
UMWÄLZUNG/RECIRCULATION
Function of active carbon filter
Technical specifications
Voltage V 230
Frequency Hz 50
Power W 12
Pressure (min.) MPa
(bar)
0,2
(2)
Pressure (max.) MPa
(bar)
0,35
(3,5)
Filter capacity l/h 1200
Waste water volume l/d 550
Content of active carbon
filter
l28
Width mm 1000
Depth mm 480
Height mm 1600
Weight kg 110
Immersion pump requirements
(building-side)
Pressure (min.) MPa
(bar)
0,2
(2)
Pressure (max.) MPa
(bar)
0,35
(3,5)
Minimum flow rate at 0.2
MPa (2 bar)
l/h 1200
Max. flow rate l/h 2000
Transport
Storing the device
12 EN
Loading ...
Loading ...
Loading ...