Loading ...
Loading ...
Loading ...
HS Series 4K User Manual 51
020-002053-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring system settings
Saving lens setting
Save t he lens posit ion. One proj ector can save m axim um up t o five lens set tings.
1. Select Menu > Configuration > Lens Settings > Lens Shift Memory > Save Current
Settings.
2. To save t he lens set ting, select an em pt y record.
3. To confirm t he select ion, select ENTER.
Applying the previous lens setting
Apply t he previously saved lens sett ing t o t he project or.
1. Before applying t he previous lens sett ing, you need t o save t he lens sett ing.
See
Saving lens setting on page 51 for furt her det ails.
2. Select Menu > Configuration > Lens Settings > Lens Shift Memory > Apply Position.
3. To apply specific lens set t ing, select t he requir ed record.
4. To confirm t he select ion, select ENTER.
Locking the lens motor
Prevent all lens m otors from m oving. I t disables t he zoom , focus, and offset sett ings, locking out
any changes and overriding all other lens features. This feature prevent s accident al lens posit ion
changes in m ult iple proj ectors inst allat ions.
1. Select Menu > Configuration > Lens Settings > Lock all Lens Motors.
2. To enable locking of all lens m ot ors, select Locked.
3. To unlock all lens m otors, select Allow.
4. To confirm t he select ion, select ENTER.
Resetting the lens to home position
Set t he lens offset back t o t he hom e posit ion.
1. Select Menu > Configuration > Lens Settings > Lens Calibration.
You can also select LENS on keypad or LENS H/LENS V on r em ot e control.
2. Select ENTER.
3. To st art t he lens calibration, select OK.
To m ake sure t he lens shift is funct ioning properly, Chr ist ie recom m ends calibrat ing the lens every
tim e t he lens are changed.
Loading ...
Loading ...
Loading ...