Loading ...
Loading ...
Loading ...
8-Port and 16-Port Gigabit Ethernet Plus Click Switch
Supplemental Information User Manual75
Factory Default Settings
You can return the switch to its factory settings. Use the end of a paper clip or some other
similar object to press and hold the Factory Defaults button on the back panel of the switch
for at least four seconds. The switch resets and returns to the factory settings that are shown
in the following table.
Table 3. Factory default settings
Setting Value or Description
Switch name None (empty)
Switch password password
IP address 192.168.0.239
Subnet mask 255.255.255.0
DHCP mode Enabled
Port speed Auto negotiation
Flow control Disabled
Loop detection Disabled
Port LED control Link speed and activity
Power saving mode
(model GSS108EPP only)
Enabled
Switch management mode Through a web browser by accessing the local browser interface or the
ProSAFE Plus Utility
Access control
(model GSS108EPP only)
Disabled
Port mirroring Disabled
IGMP snooping • Enabled. IGMP snooping status
• Disabled. Validation of IGMPv3 IP headers
• Disabled. Blocking of unknown multicast addresses
PoE • Port Power. Enabled
• Port priority. Low
• Power mode. 802.3at
• Power limit type. User
• Power limit. 30.0W
• Detection type. IEEE 802
LAGs Disabled
Note: LAGs are supported on switch models GSS108EPP and GSS116E,
but they are not supported on switch model GSS108E.
Loading ...
Loading ...
Loading ...