Loading ...
Loading ...
Loading ...
8-Port and 16-Port Gigabit Ethernet Plus Click Switch
Manage and Monitor the Switch User Manual52
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch Using a Web
Browser on page 7.
The login window opens.
4. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
5. Select System > Management > Switch Management Mode.
6. Select one of the following radio buttons:
• Web browser Only.
You can configure the switch through a web browser by
accessing the local browser interface. You cannot configure the switch through the
ProSAFE Plus Utility.
• Web browser GUI and ProSAFE Utility. Y
ou can configure the switch through a web
browser by accessing the local browser interface or through the ProSAFE Plus Utility.
This is the default setting.
7. Click the Apply button.
Your settings are saved.
Manage Access Control
Access control allows you to control which devices can access the switch over a web browser
for management purposes. By default, access control is disabled. By adding one or more
devices to the Access Control table, access control is enabled and only devices in the table
are allowed to access the local browser interface of the switch.
Add Devices to the Access Control Table
If you add devices to the he Access Control table, use the mask to allow one IP address or a
range of IP addresses to access the local browser interface of the switch. Consider the
following examples:
• If the mask is 255.255.255.255, only the device for which you specify the host IP address
in the Source IP
Address field can access the local browser interface.
Loading ...
Loading ...
Loading ...