Loading ...
Loading ...
Loading ...
30
Stability Criteria
This option allows the user to select the signal stability criteria for the measured parameter (pH,
mV, ISE):
Fast - this setting will give faster results with less accuracy.
Medium - this setting will give medium speed results with medium accuracy.
Accurate - this setting will give slower results with high accuracy.
To set the Stability Criteria:
• Press
while in pH Measure mode.
• Press
.
• Use
or to select the Stability
Criteria option.
• Press
and use or to
highlight the desired option.
• Press
to confirm your selection or press
to cancel operation.
Reading Mode
This option allows the user to select between Direct and
Direct/AutoHold pH reading mode. If choosing the AutoHold option, the current reading can be frozen
on the LCD when
is pressed and the stability criteria is reached.
To set the Reading Mode:
• Press
while in pH Measure mode.
• Press
.
• Use
or to select the Reading Mode
option.
• Press
/ to select Direct / AutoHold
option as desired.
• Press
to cancel operation.
pH SETUP
Loading ...
Loading ...
Loading ...