Loading ...
Loading ...
Loading ...
Mounting Your Tread Base Edition in an Automobile
NOTICE
Before mounting the device, check the local laws pertaining to windshield mounting.
WARNING
Do not use the suction cup mount on a motorcycle.
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
NOTE: The automobile mount is not included with all device models. Go to garmin.com to purchase optional
accessories.
1 Plug the automotive power cable into the port on the device.
2 Remove the clear plastic from the suction cup .
3 Clean and dry your windshield and the suction cup with a lint-free cloth.
4 Press the suction cup to the windshield, and flip the lever back toward the windshield.
5 Snap the cradle onto the suction cup arm.
6 Fit the bottom of your device into the cradle.
7 Press the device into the cradle until it snaps into place.
8 Plug the other end of the automotive power cable into a power outlet.
Garmin PowerSwitch
WARNING
Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems
install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can
cause bodily injury.
You can use a connected Garmin PowerSwitch device to control lights, fans, and more from your Tread device.
Mounting Considerations
• The device must be mounted close to the battery and within the range of the supplied power cable.
• The mounting surface must be strong enough to support the weight of the device.
• The location must allow room for the routing and connection of all cables.
Appendix 69
Loading ...
Loading ...
Loading ...