Loading ...
Loading ...
Loading ...
87
Host name
Enter the host name or IP address of the computer
that supplies the web page you want to register on
the Exception list.
Port number
Enter the port number of the computer that supplies
the web page you want to register on the Exception
list.
Set
Register the values of the [Host name] and [Port
number] you entered to the list of the selected
number.
Delete
Delete the contents of the list selected with [No.].
Brute force attack protection tab
Brute force attack means an attack method by
trying every possible pattern of password in
sequence. This camera has a function to prevent
the Brute force attack.
• Applies to the HTTP and RTSP accesses.
• Does not monitor the Brute force attack to the
RTSP access when the RTSP authentication is
off.
Brute force attack protection
Enable
Select the checkbox to enable the Brute force attack
protection function.
Setting
Make settings for the Brute force attack
protection function.
Count
Set the number of count for the authentication
failure of attacker detection.
Release mode
Set the mode to release attacker detection.
[Always]: Once registered in the attacker list, it will
not be released.
[Timer]: Release after the time set in [Release time]
has passed.
Note
The attacker list is released whenever the camera is
rebooted even if the [Release mode] is in either
case; [Always] and [Timer].
Release time
Set the time to release the attacker detection. This
setting is available when the [Release mode] is set to
[Timer].
Attacker list
Confirm the IP address of the user detected as an
attacker.
Loading ...
Loading ...
Loading ...