Sony SRGX120/W SRG-X120 8.5 Megapixel Network Camera

Product Manual - Page 74

For SRGX120/W.

PDF File Manual, 104 pages, Read Online | Download pdf file

SRGX120/W photo
Loading ...
Loading ...
Loading ...
74
Black gamma range (GAMMA - BLACK GAMMA
RANGE)
You can adjust the brightness range that black
gamma works. Select from [Low], [Middle], and
[High]. The brightness range becomes narrow when
you select [Low], and it becomes large when you
select [High].
Black level (GAMMA - BLACK LEVEL)
You can adjust the master black level. Select a value
from [–48] to [0] to [+48].
Knee (BRC-X400/X401)
Knee setting (KNEE - SETTING)
Select the checkbox to set the Knee.
Knee mode (KNEE - KNEE MODE)
When you select [Auto], the knee level is
automatically optimized based on the brightness
level of the video being shot. When you select
[Manual], you can manually adjust the knee level
irrespective of the brightness level of the video
being shot. This setting is available when the
checkbox of [Knee setting] is selected.
Knee slope (KNEE - KNEE SLOPE)
When [Knee mode] is set to [Manual], you can adjust
the gradient of knee (compression rate).
Select a value from [–7] to [0] to [+7].
This setting is available when the checkbox of [Knee
setting] is selected and [Knee mode] is set to
[Manual].
Knee point (KNEE - KNEE POINT)
When [Knee mode] is set to [Manual], you can adjust
the knee point. Select a value from [0] to [12].
This setting is available when the checkbox of [Knee
setting] is selected and [Knee mode] is set to
[Manual].
Picture
High resolution mode (PICTURE - HIGH
RESOLUTION)
Select the checkbox to emphasize edges for higher-
resolution images.
Notes
When you select the checkbox, image noise may
increase.
When [Mode] is set to [Manual] in [Detail], the
function is not available.
NR mode (PICTURE - NOISE REDUCTION)
Select the noise reduction setting.
[Simple]: Set the noise reduction strength of 2D/3D
at the same level and removes noise
simultaneously.
[Advanced]: Set the noise reduction strength of 2D/
3D individually and removes noise
simultaneously.
NR (XDNR)
This setting is available when [NR mode] is set to
[Simple].
Select from Off (minimum) or level [1] through level
[5] (maximum) for noise reduction.
2D NR level (PICTURE - 2D NR LEVEL)
This setting is available when [NR mode] is set to
[Advanced].
Select from [0] to [5] for noise reduction.
3D NR level (PICTURE - 3D NR LEVEL)
This setting is available when [NR mode] is set to
[Advanced].
Select from [0] to [5] for noise reduction.
Image stabilizer (PICTURE - IMAGE STABILIZER)
Select the checkbox to display steadier images
when the camera is installed in a place subject to
vibration.
Notes
When the Image stabilizer function is set, the
angle of view of the image will be smaller than
usual.
Depending on the vibration frequency, Image
stabilizer may not work even when it is set.
Select the checkbox of [Image stabilizer] when
installing the camera.
Flicker cancel (PICTURE - FLICKER CANCEL)
When you select the checkbox, the flicker correction
feature is enabled.
Note
Depending on conditions such as the type of
illumination and shutter speed, the flicker correction
feature may not be effective.
If the shooting frame rate is close to the power
supply frequency, the flicker correction feature may
not be able to fully remove flickers even when it is
enabled. If this happens, adjust the shutter speed.
We recommend you to clear the checkbox of [Flicker
cancel] when shooting under lights where no flicker
is generated, such as outdoors.
Loading ...
Loading ...
Loading ...