Loading ...
Loading ...
Loading ...
Configuring QoS Bandwidth Control Configuration
User Guide 663
Broadcast
Threshold (0-
1,000,000)
Specify the upper rate limit for receiving broadcast packets.
The valid values differ among different rate modes. For kbps, the rate ranges from
1 to 1000000 kbps, and is rounded off to the nearest multiple of 64. For ratio, the
rate ranges from 1 to 100 percent. For pps, the rate ranges from 1 to 1488000
packets per second. The value 0 means the broadcast threshold is disabled.
The broadcast traffic exceeding the limit will be processed according to the
Action configurations.
Multicast
Threshold (0-
1,000,000)
Specify the upper rate limit for receiving multicast packets.
The valid values differ among different rate modes. For kbps, the rate ranges from
1 to 1000000 kbps, and is rounded off to the nearest multiple of 64. For ratio, the
rate ranges from 1 to 100 percent. For pps, the rate ranges from 1 to 1488000
packets per second. The value 0 means the multicast threshold is disabled.
The multicast traffic exceeding the limit will be processed according to the Action
configurations.
UL-Frame
Threshold (0-
1,000,000)
Specify the upper rate limit for receiving unknown unicast frames.
The valid values differ among different rate modes. For kbps, the rate ranges
from 1 to 1000000 kbps, and is rounded off to the nearest multiple of 64. For
ratio, the rate ranges from 1 to 100 percent. For pps, the rate ranges from 1 to
1488000 packets per second. The value 0 means the unknown unicast threshold
is disabled.
The traffic exceeding the limit will be processed according to the Action
configurations.
Action Select the action that the switch will take when the traffic exceeds its
corresponding limit.
Drop: Set the Action as Drop. The port will drop the subsequent packets when the
traffic exceeds the limit.
Shutdown: Set the Action as Shutdown. The port will be shutdown when the
traffic exceeds the limit.
Recover Time Specify the recover time for the port. It takes effect only when the action is set
as shutdown. The valid values are from 0 to 3600 seconds. When the port is
shutdown, it can recover to its normal state after the recover time passed. If the
recover time is specified as 0, which means the port will not recover to its normal
state automatically and you can recover the port manually.
2) Click Apply.
Note:
The member port of an LAG (Link Aggregation Group) follows the configuration of the LAG and not its
own. The configurations of the port can take effect only after it leaves the LAG.
Loading ...
Loading ...
Loading ...