Loading ...
Loading ...
Loading ...
Configuring DDM (Only for Certain Devices) DDM Configuration
User Guide 141
Step 4 show ddm configuration state
Display the DDM state of the SFP ports.
Step 5 end
Return to Privileged EXEC Mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set SFP port 1/0/25 to shut down when
the warning
threshold is exceeded.
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/25
Switch(config-if)#ddm shutdown warning
Switch(config-if)#show ddm configuration state
DDM Status Shutdown
Gi1/0/25 Enable Warning
...
Switch(config-if)#end
Switch#copy running-config startup-config
2.2.3 Configuring the Threshold
â– Configuring Temperature Threshold
Follow these steps to configure the threshold of the DDM temperature on the specified
SFP port.
Step 1 configure
Enter global configuration mode.
Step 2 interface { fastEthernet
port
| range fastEthernet
port-list
|
gigabitEthernet
port
| range
gigabitEthernet
port-list
| ten-gigabitEthernet
port
| range ten-gigabitEthernet
port-list
}
Enter interface configuration mode.
Loading ...
Loading ...
Loading ...