Loading ...
Loading ...
Loading ...
User Guide 538
Configuring Routing Viewing Routing Table
4.1.2 Viewing IPv6 Routing Table
Choose the menu L3 FEATURES> Routing Table > IPv6 Routing Table > IPv6 Routing
Information Summary to load the following page.
Figure 4-2 Viewing IPv6 Routing Table
View the IPv6 routing entries.
Protocol Displays the type of the routing entry.
Connected: The destination network is directed connected to the switch.
Static: The routing entry is a manually added static routing entry.
Destination
Network
Displays the destination IPv6 address and subnet mask.
Next Hop Displays the IPv6 gateway address to which the packet should be sent next.
Distance Displays the administrative distance, which is the trust rating of a routing entry. A
higher value means a lower trust rating. Among the routes to the same destination,
the route with the lowest distance value will be recorded in the IPv6 routing table.
Metric Displays the metric to reach the destination IPv6 address.
Interface Name Displays the name of the gateway interface.
4.2 Using the CLI
4.2.1 Viewing IPv4 Routing Table
On privileged EXEC mode or any other configuration mode, you can use the following
command to view IPv4 routing table:
show ip route [ static | connected ]
View the IPv4 route entries of the specified type. If not specified, all types of route entries will be displayed.
static: View the static routes.
connected: View the connected routes.
Loading ...
Loading ...
Loading ...