Loading ...
Loading ...
Loading ...
Configuring OAM (Only for Certain Devices) Ethernet OAM Configurations
User Guide 999
Maximum
OAMPDU
Displays the maximum size of OAMPDU.
Remote
Loopback
Displays whether the local entity supports Remote Loopback.
Unidirection Displays whether the local entity supports Unidirection.
Link Monitoring Displays whether the local entity supports Link Monitoring.
Variable Request Displays whether the local entity supports Variable Request.
PDU Revision Displays the PDU Revision of the local entity.
Operation Status Displays the status of OAM connection:
Disable: OAM is disabled on the port.
LinkFault: The link between the local entity and the remote entity is down.
PassiveWait: The port is in passive mode and is waiting to see if the peer device is
OAM capable.
ActiveSendLocal: The port is in active mode and is sending local information.
SendLocalAndRemote: The local port has discovered the peer but has not yet
accepted or rejected the configuration of the peer.
SendLocalAndRemoteOK: The local device agrees the OAM peer entity.
PeeringLocallyRejected: The local OAM entity rejects the remote peer OAM entity.
PeeringRemotelyRejected: The remote OAM entity rejects the local device.
NonOperHalfDuplex: Ethernet OAM is enabled but the port is in half-duplex
operation. You should configure the port as a full-duplex port.
Operational: OAM connection is established with the peer and OAM works normally.
Loopback Status Displays the loopback status.
No Loopback: Neither the local entity nor the remote entity is in the loopback mode.
Local Loopback: The local entity is in the loopback mode.
Remote Loopback: The remote entity is in the loopback mode.
The OAM information of the remote entity is as follows:
Mode Displays the OAM mode of the remote entity.
MAC Address Displays the MAC address of the remote entity.
Vendor (OUI) Displays the Vendor’s OUI of the remote entity.
Loading ...
Loading ...
Loading ...