Loading ...
Loading ...
Loading ...
Configuring Spanning Tree MSTP Configurations
User Guide 425
3.2.2 Configuring the MSTP Region
â– Configuring the MST Region
Follow these steps to configure the MST region and the priority of the switch in the
instance:
Step 1 configure
Enter global configuration mode.
Step 2 spanning-tree mst instance
instance-id
priority
pri
Configure the priority of the switch in the instance.
instance-id
: Specify the instance ID, the valid values ranges from 1 to 8.
pri
: Specify the priority for the switch in the corresponding instance. The value should be an
integral multiple of 4096, ranging from 0 to 61440. The default value is 32768. It is used to
determine the root bridge for the instance. Switches with a lower value have higher priority,
and the switch with the highest priority will be elected as the root bridge in the corresponding
instance.
Step 3 spanning-tree mst configuration
Enter MST configuration mode, as to configure the VLAN-Instance mapping, region name and
revision level.
Step 4 name
name
Configure the region name of the region.
name
: Specify the region name, used to identify an MST region. The valid values are from 1 to
32 characters.
Step 5 revision
revision
Configure the revision level of the region.
revision:
Specify the revision level of the region. The valid values are from 0 to 65535.
Step 6 instance
instance-id
vlan
vlan-id
Configure the VLAN-Instance mapping.
instance-id
: Specify the Instance ID. The valid values are from 1 to 8.
vlan-id
: Specify the VLAN mapped to the corresponding instance.
Step 7 show spanning-tree mst { configuration [ digest ] | instance
instance-id
[ interface [
fastEthernet
port
| gigabitEthernet
port
| port-channel
lagid
| ten-gigabitEthernet
port
] ] }
(Optional) View the related information of MSTP Instance.
digest
: Specify to display the digest calculated by instance-vlan map.
instance-id
: Specify the Instance ID desired to view, ranging from 1 to 8.
port:
Specify the port number.
lagid:
Specify the ID of the LAG.
Loading ...
Loading ...
Loading ...