Loading ...
Loading ...
Loading ...
Configuring Layer 2 Multicast IGMP Snooping Configuration
User Guide 308
Leave Time Specify the leave time for the VLAN.
When the switch receives a leave message from a port to leave a multicast group,
it will wait for a leave time before removing the port from the multicast group.
During the period, if the switch receives any report messages from the port, the
port will not be removed from the multicast group. Exceptions are as follows:
•
If the member port ages out before the Leave Time ends and no report
messages are received, the port will be removed from the multicast group
once its Member Port Aging Time ends.
•
The Leave Time mechanism will not take effect when Fast Leave takes effect.
A proper leave time value can avoid other hosts connecting to the same port of
the switch being mistakenly removed from the multicast group when only some of
them want to leave.
IGMP Snooping
Querier
Enable or disable the IGMP Snooping Querier for the VLAN.
When enabled, the switch acts as an IGMP Snooping Querier for the hosts in
this VLAN. A querier periodically sends a general query on the network to solicit
membership information, and sends group-specific queries when it receives leave
messages from hosts.
Query Interval With IGMP Snooping Querier enabled, specify the interval between general query
messages sent by the switch.
Maximum
Response Time
With IGMP Snooping Querier enabled, specify the host’s maximum response time
to general query messages.
Last Member
Query Interval
With IGMP Snooping Querier enabled, when the switch receives an IGMP leave
message, it obtains the address of the multicast group that the host wants to
leave from the message. Then the switch sends out group-specific queries to this
multicast group through the port receiving the leave message. This parameter
determines the interval between group-specific queries.
Last Member
Query Count
With IGMP Snooping Querier enabled, specify the number of group-specific
queries to be sent. If specified count of group-specific queries are sent and no
report message is received, the switch will delete the multicast address from the
multicast forwarding table.
General Query
Source IP
With IGMP Snooping Querier enabled, specify the source IP address of the
general query messages sent by the switch. It should be a unicast address.
Static Router
Ports
Select one or more ports to be the static router ports in the VLAN. Static router
ports do not age.
Multicast streams and IGMP packets to all groups in this VLAN will be forwarded
through the static router ports. Multicast streams and IGMP packets to the groups
that have dynamic router ports will be also forwarded through the corresponding
dynamic router ports.
Forbidden
Router Ports
Select ports to forbid them from being router ports in the VLAN.
2) Click Save.
Loading ...
Loading ...
Loading ...