Loading ...
Loading ...
Loading ...
21
Plug Button Installation
• Remove protective covering from panels, if applied.
• Check that all cam locks are engaged.
• Insert plug buttons into the cam lock wrench access holes and firmly tap in place using a rubber mallet.
• Plug buttons supplied for walls and ceilings are vinyl, plug buttons supplied for floors are either stainless steel or high-
strength plastic
Penetrations
• Some areas of walk-in panels contain working parts and should not be penetrated. Do not make a penetration within 2” of
cam lock holes or panel seams.
• Penetrations must be completely sealed (insulation, foam, etc.) to prevent heat transfer and condensation/ice formation.
Electrical penetrations must be sealed both internally and externally to form an acceptable seal.
• Penetrations in outdoor ceilings is not permitted.
Trim and Wainscoting Installation
• Install any trim provided per the assembly drawing. Reference the assembly drawing for trim type and location.
• All wainscoting material will be cut to size and shown on the assembly drawing. Wainscoting material is numbered for easy
identification.
Loading ...
Loading ...
Loading ...