Loading ...
Loading ...
Loading ...
11
• U-shaped screeds are available for customers who desire to use a vinyl screed, but need either a lower profile or need a
special height finished unit, and would prefer to use a standard sized wall panels. U-shaped screeds are factory cut to
length and mitered on the corners, with intended installation locations shown on the assembly drawing.
• Flat-bottom walls are available for configurations that require a metal screed, do not have an integral cove, and will be
anchored by an exterior (or interior) mounting angle. Mounting angles are supplied in 10’ lengths and field cut to fit the
dimensions of the enclosure as necessary.
Screed Installation
• Place the screeds on the floor using the chalk lines as guides. Where factory cut screed is used, screed sizes and layout are
identified in the assembly drawings.
• A thermal break (breaker strip) is required to separate all freezer interior concrete from the exterior concrete. The interior
freezer concrete floor must be insulated and completely isolated. The screed/wall is to be centered over the thermal break.
Loading ...
Loading ...
Loading ...