DCS-100 User Manual

Loading ...

59D-Link D-ViewCam User Manual

Section 3 - Conguration

Record Mode

There are 2 recording modes and 5 video proles to choose from. Please choose one that best suits your scenario.

Always Record

Select this option to record video continuously.

Record on Motion

Select this option to start recording when motions are detected. Please adjust sensitivity, the frame interval, and set up the detection zone

to detect motion. Frame interval is the interval in the number of frames between each check by D-ViewCam. To set up a single detection

zone, left-click and drag the mouse to draw a rectangle. To set up more than one detection zone, simply repeat the same process or click

All to select the entire screen.

Note: The maximum number of rectangle detection zones you may create is 10.

Enable Dual Record: recording two video streaming from IP camera at the same time.

Record Audio: Use the check box to enable or disable audio recording

Keep key-frame only: System will only record key frames of the video stream.

Note: The key frame interval is controlled by each camera manufacturer and cannot be adjusted.

Pre-record/Post-record Time

The pre-record/post-record function saves the recording data accordingly. For instance, to set up a 5 second pre-record time means the system will

start saving the recording data 5 seconds before the event happens.

Note: The maximum record period is 60 seconds.

Loading ...

D-Link DCS-100 D-ViewCam