DCS-100 User Manual

Loading ...

114D-Link D-ViewCam User Manual

Section 3 - Conguration

Control the movement of PTZ cameras. With cameras that support PTZ control, you can move, zoom, patrol, adjust the focus, and set preset points

of the cameras.

Adjust the camera view and click on the Set icon and save the view as preset point 01. Adjust the camera view again and set up the preset point 02.

Repeat the process until nish setting up all preset points. Enter any names you want instead of the preset point 01, preset point 02, preset point

03…, click on the Go icon to view the preset points.

Note: To change the speed settings of your PTZ camera, click on Main Console > General Setting > Setting > System Setting > PTZ Cong.

Auto Pan

Go to Go to Preset Point and click on Start AutoPan to enable auto pan. Click on Stop AutoPan to stop.

Auto Pan enables the camera to scan an area horizontally from left to right or right to left.

Zoom

Click on the + (Zoom Tele) and – signs (Zoom Wide) to zoom in and zoom out the view.

Focus

To focus near means objects that are closer will be clearer than the objects that are further away. On contrast, to focus far means objects that are

further will be clearer than the objects that are closer. Click on the Focus icon and select auto focus if you want the system to decide the focus

point for you.

PTZ Control

Add Preset Point/Go to Preset Point

Loading ...

D-Link DCS-100 D-ViewCam