Loading ...
Loading ...
Loading ...
117
5. 6K/4K Photo and Drive Settings
• The table below shows the numbers of pictures that can be taken with [SH2 PRE] and
[SH1 PRE] before the shutter button is pressed fully.
∫ About the maximum number of pictures that can be taken continuously
When you press the shutter button halfway, the maximum number
of pictures you can take continuously will appear. You can check
the approximate number of burst pictures that can be taken.
Example: When 20 pictures can be taken: [r20]
• Once recording starts, the maximum number of pictures that can be taken continuously will
decrease.
• With [H], [M] or [L]: The recording speed slows down when [r0] appears.
With [SH2], [SH1], [SH2 PRE] or [SH1 PRE]: Burst recording stops when [r0] appears.
• When [r99+] is displayed, you can take 100 or more pictures continuously.
∫ Notes on focus in Burst Mode
The way focus is achieved varies according to the focus mode setting and the [Focus/
Release Priority] setting in the [Custom] ([Focus / Release Shutter]) menu.
¢1 When the subject is dark, the focus is fixed on the first picture.
¢2 Burst speed takes priority, and focus is estimated within possible range.
¢3 The burst speed may become slower because the camera is continuously focusing on the
subject.
Focus Mode [SH2 PRE] [SH1 PRE]
[AFS]/[MF] 24 pictures
8 pictures
[AFF]/[AFC] 8 pictures
Focus mode [Focus/Release Priority]
[SH2]/[SH1]/
[SH2 PRE]/[SH1 PRE]/
[H]
[M]/[L]
[AFS]
[FOCUS]
At the first picture
[BALANCE]
[RELEASE]
[AFF]/[AFC]
¢1
[FOCUS] Predicted focusing
¢2
Normal focusing
¢3
[BALANCE]
Predicted focusing
¢2
[RELEASE]
[MF] — Focus set with Manual Focus
2020r20
0
2
00
Loading ...
Loading ...
Loading ...