Loading ...
Loading ...
Loading ...
8
Problem: Solution:
My blender is not
turning on
Be sur
e the blade assembly is on the
blending cup correctly and locked into place
Plug the blender into an independent and
electrical outlet and make sur
e the blender
is securely plugged in. If it still doesn't work,
try plugging into a dif
ferent outlet and/or
check your home's circuit breaker.
The blender stops running
The motor could have overheated.
The resettable fuse, which protects the motor
if overloaded, may have been tripped. When
this happens, r
eset the appliance by unplug-
ging it and letting it cool for a minimum of 15
minutes. Then, r
educe the contents
of the blending cup and/or clear any jams.
Restart the unit as noted in the operating
dir
ections.
The blade assembly is hard
to remove after blending
The ingr
edients cause pressure, and with the
airtight seal, pressure builds up creating a
vacuum or a suction effect. This is normal.
Unit appears to be leaking
Check rubber gasket and make sure it's ush
with the blender assembly. You can also
check the rubber gasket to see if is in place
or even damaged. The blade assembly should
be tight.
COMPACT BLENDER
TROUBLESHOOTING
Problem: Solution:
Juice extractor does not turn on
Check to see if the locking clamps are
properly engaged.
(See Assembly Instructions, page 6.)
T
urn to HIGH to start juicing.
The juice extractor stops running
The motor could have overheated.
The resettable fuse, which protects the motor
if overloaded, may have been tripped.
When this happens, reset the appliance by
unplugging it and letting it cool for a minimum
of 15 minutes. Then, reduce the contents or
clear any jams. Restart the unit as noted in
the operating directions.
Juice ow is slow
Excess pulp in mesh lter basket can
slow juice rate. Stop the juice
extractor and clean lter basket.
Dif
culty getting herbs or leafy
greens down the feed tube
Place herbs between other ingredients. When
using leafy greens, always place the leafy side
in rst and do not over pack the feed tube.
Unit is on but juice/pulp
not owing
Make sur
e the mesh lter basket/blade
is in place.
COMPACT JUICE EXTRACTOR
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...