Loading ...
Loading ...
Loading ...
6
COMPACT BLENDER OPERATING
AND SAFETY TIPS
• Make sure the electrical outlet is rated at the same voltage as that
stated on the bottom of the blender motor base.
• Don’t remove blending cup while unit is running.
• Don’t place blade assembly onto motor base without the
blending cup attached.
• Make sure blade assembly is tightly attached when utilizing the
blending cup.
• Always remove blade assembly before cleaning.
• Never use metal utensils, as damage may occur to the blending cup
or cutting assembly.
• Don’t overload blending cup. If the motor stalls, turn the blender off
immediately, unplug the unit and let it cool for at least 15 minutes.
Then, remove a portion of the food and continue.
• CAUTION: Never use carbonated beverages in the blending cup.
• Don’t blend hot liquids in blending cup.
• Don’t use any container or accessories not recommended by
Cuisinart. Doing so may result in injury.
• To remove blending cup, turn slightly counterclockwise before lifting.
• The blending cup is not recommended for microwave use.
COMPACT JUICE
EXTRACTOR ASSEMBLY
1. Place motor base on a clean flat surface. Make sure the motor base
is unplugged from the power outlet.
2. Place filter housing on top of motor base. Do not lock locking clamps
into place until you’ve completed assembling the juice extractor.
3. Insert the mesh filter basket/blade firmly into filter housing by pressing
down on the rim of the filter so it locks securely in place. Be careful
not to touch the blades in the bottom of the basket and be sure
this part is inserted before every use.
4. Insert the pulp container onto the side of the unit by tilting unit slightly.
Then place cover on top of the filter housing. Be sure to align the feed
tube over the mesh filter basket.
5. Make sure the locking clamps are pushed in the down position
so the cover sits securely in the grooves.
6. Place a glass beneath the spout at the front of the unit.
7. Insert the food pusher inside the feed tube.
8. Move each locking clamp upwards against the bowl and lock them into
place on top cover
COMPACT JUICE
EXTRACTOR DISASSEMBLY
1. Unplug the Compact Juice Extractor.
2. Unlock the locking clamps and cover then remove the pusher. The
cover is unlocked when it is resting at the back of the motor base.
3. Lift and remove cover from filter housing.
4. Carefully remove mesh filter basket/blade from the filter housing by
pulling up on the sides of the rim. Be careful not to touch the blades
in the bottom of the basket.
Loading ...
Loading ...
Loading ...