Loading ...
Loading ...
Loading ...
Title Using the Basic Dive Stopwatch
Identifier GUID-9F9DD4BE-4689-4250-8161-78DB3917CD43
Language EN-US
Description
Version 2
Revision 4
Changes Added the tip for apnea mode.
Status Released
Last Modified 25/04/2022 16:00:00
Author cozmyer
Using the Basic Dive Stopwatch
1 Select an option:
• Add the Stopwatch Timer data screen to the Single-Gas, Multi-Gas, CCR, or Gauge dive mode.
• Enable the Stopwatch surface data screen for the Apnea or Apnea Hunt dive mode.
2 During a gas dive or apnea surface interval, scroll to the stopwatch screen.
TIP: During an apnea surface interval, you can press and hold START to open the stopwatch and start the
timer, even if the screen is not enabled.
3 Press START to start the timer.
4 Press STOP to stop the timer.
5 Press BACK to reset the timer.
Title Switching Gases During a Dive
Identifier GUID-3A9B1B51-858F-4C5E-B629-27ECF87CEBE1
Language EN-US
Description
Version 1
Revision 7
Changes
Status Released
Last Modified 21/07/2020 16:33:48
Author cozmyer
Switching Gases During a Dive
1 Start a single-gas, multi-gas, or closed-circuit rebreather (CCR) dive.
2 Select an option:
• Press START, select Gas, and select a backup or decompression gas.
NOTE: If necessary, you can select Add New and enter a new gas.
• Dive until you reach the Deco PO2 threshold (Setting PO2 Thresholds, page 12).
The device prompts you to switch to the gas with the highest percentage of oxygen.
NOTE: The device does not switch gases for you automatically. You must select the gas.
Diving 27
Loading ...
Loading ...
Loading ...